Browse by Category:




Subscribe to our FREE email newsletter to be notified of new products, clearance sales and special offers on premium quality parts !!

More info

Email:




Deal with the pros ! Check out our customer feedback ...


Click here to read unsolicited feedback comments from our customers

Works Bell Original Steering Wheel (Blue Stitching 330 mm version)

The Works Bell Original Steering Wheel has been discontinued and is no longer avalable. All stock has been sold out.

Click here for the new and improved Works Bell Steering Wheel which replaces the Works Bell Original Steering Wheel ...

http://www.tunersgroup.com/Online_Store/Works_Bell_WB_Steering_Wheel_Yellow_Stitching.html

untitled image untitled image

The new Works Bell Original Steering Wheel Blue Stitching version is a finely crafted wheel made with the same attention to detail of all Works Bell's products.

untitled image

It features incredible quality supple synthetic leather, blue stitching, and the eyecatching "Let's enjoy drifting !" logo on the centre spoke of the steering wheel, highlighting Works Bell's heritage of supplying steering wheels and qucik releases to many of the world's top drift teams in Formula D and D1GP, including Toshiki Yoshioka and the iconic Team Orange.

The red stitching version has a diameter of 350mm. The new blue version shown on this page has a diameter of 330 mm.

It is finished off perfectly with the Works Bell Original Horn Button, which is included with every Works Bell Original Steering Wheel sold.

If you want to make your car stand out from the crowd, this steering wheel is a great way to do that, and is rarely seen on cars outside of Japan.

JUN Automotive Uses The Works Bell Original Steering Wheel

JUN Mitsubishi Evo XJUN Mitsubishi Evo X

The Works Bell Original Steering Wheel (red stitching version) is the steering wheel used on JUN's Mitsubishi Evo X project car.

The fact that an iconic Japanese Tuner like Jun could fit any steering wheel they want and chose the Works Bell Original Steering Wheel speaks volumes.

Technical Data

This steering wheel has an outer diameter of 330 mm, and uses a 6 bolt, 70mm PCD bolt pattern (the same bolt pattern used as standard 6-bolt Momo steering wheels).

The Works Bell Original Steering Wheel bolts directly to all Works Bell Steering Bosses / Hubs, the Works Bell Rapfix II Quick Release, and the tilting Works Bell Rapfix GTC Quick Release.

untitled image

The Works Bell Original Steering Wheel can also be used with many compatible 6 bolt Nardi bolt pattern steering bosses / hubs (PCD 74mm), by using the Works Bell Conversion Spacer (see photo), which allows you to fit a Momo bolt pattern steering wheel to a Nardi bolt pattern steering boss / hub and vice versa.

So regardless of what kind of boss kit or steering wheel you currently use, it is likely a simple matter to fit this steering wheel to your car.

In terms of thickness of the rim of this steering wheel, the general cross sectional shape of the rim of this wheel is an ergonomic elliptical shape.

At the top centre of the wheel, the cross sectional shape is approx 32mm front to back and 25 mm top to bottom.

The sides of the wheel are sculpted ergonomically to fit the hand. At the point which is at approximately 10 o'clock and 2 o'clock on the wheel, where it widens, the wheel is 32 mm thick front to back, and 34 mm thick at it's widest point at that position.

Additional Photos Of This Product

untitled image untitled image untitled image untitled image

Shown in the image above is the red stitching 350 mm version of this steering wheel installed in a car with the Works Bell Paddleshifter Kit (paddleshifter not included)

Our Pricing

We are one of only two authorised Works Bell distributors worldwide outside of Japan.

This steering wheel is manufactured in China to Works Bell's specifications, with quality control carried out by Works Bell's engineers in Japan.

Manufacturing of the Works Bell Original Steering Wheel and Yoshioka Steering Wheel is being done in China to make those two steering wheels more affordable as there had been a lot of demand from customers for lower pricing on Works Bell steering wheels.

So it is done in order to provide customers with lower pricing on the Works Bell Original Steering Wheel and Yoshioka Steering Wheel. Works Bell listened to their customers and came up with a way to provide what customers wanted, without sacrificing quality.

The only other Works Bell product which is made outside of Japan is the premium quality Works Bell Team Orange Steering Wheel, which is made in Italy.

All Works Bell's other products are made in Japan.

Genuine Guarantee & Counterfeits Warning

Say no to fakes, counterfeits & knock-offs !Say no to fakes, counterfeits & knock-offs !

We are one of only two authorised Works Bell distributors worldwide outside of Japan.

By purchasing from us you are absolutely assured of getting the genuine, real deal, Works Bell product.

Click here to read our consumer warning about counterfeit, fake and knock off copies of Works Bell products

We Ship Worldwide

We ship worldwide !We ship worldwide !

The full range of genuine Works Bell products are available directly from us.

We ship Works Bell products worldwide, so we can deliver any of Works Bell's products to your door !

Prices are in Australian Dollars and include GST (Australian Goods & Services Tax). Click here for the Universal Currency Convertor to convert our price into your local currency.

How To Order

Simply enter the quantity you want in the menu at the top of this page, and click the "add to cart" button.

Category: Steering Wheels

Product Code: WB-ORIGINALSTEERINGWHEEL-BLUE

Manufacturer: Works Bell

Model: Works Bell Original Steering Wheel (Blue Stitching 330 mm version)

created on 2009-08-21 11:47:37 by adamr